Huepar B02CG - 360° Green Beam Dual Plane Leveling and Alignment Cross Line Self-leveling Laser Level

• Fully Layout with 2 x 360° Line Lasers: The laser level B02CG projects two 360° laser lines cover the floor, wall, ceiling around the room. The horizontal line, vertical line and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. 

• Dual Power Methods & Type-C Charging Port: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

• Brighter Green Laser & Outdoor Pulse Mode: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 25m (300LUX) of accuracy within ±3mm at 10m. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 60m with Huepar Line Laser Detector.

360° Laser Lines for Wide Application:

One 360° horizontal and one 360° vertical planes enable users to cover the floor, wall, ceiling all around the room.

The horizontal line is only 10.5cm away from the ground ideal for users to tile the dado.

Short press operation button to switch the laser lines in turn.

The horizontal line, vertical line and combined laser lines can be selected individually depends on job site applications.

Type-C Charging Port:

l This laser tool utilizes the included large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time.

l The lithium battery with the Type-C charging port can be charged separately.

l Direct input charging: When taking out the battery, the laser tool can be used at the job site by plugged in.

l Four battery indicators on keypad allow users to know the current battery volume.

l Charging protection helps prevent from overcharging. 

Flat Top Cover Design:

l Designed with the flat top cover, this laser tool projects 360° laser lines for tiling or ceiling installation at 10mm from the wall and ceiling.

l Huepar PV10 + Bracket is recommended for quick setup in wall and ceiling applications (ASIN: B07XYMLLLV, need to purchase separately)

l The laser windows can be removed and replaced with a screwdriver

Durable Design:

l The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection.

l The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool.

l IP54 water/dust resistance ensures you work well in hazardous working conditions.

Bright Green Laser Diode:

l This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.

l At the same power, the green laser is twice bright as the red laser, with a working range up to 25m (300LUX) of accuracy within ±3mm at 10m.

Package Contents:

• 1 x Huepar B02CG Laser Level
• 1 x Rechargeable Lithium Battery 3.7V / 5200mAh
• 1 x Type-C Power Cord
• 1 x Power Adapter
• 1 x 360° Magnetic Pivoting Base
• 1 x Green Laser Target Plate
• 1 x Multilingual User Manual
• 1 x Hard Carry Case